red and blue grow light bulbs Red/Blue Grow Light | 3 Headed Gooseneck Grow Light
SKU: 29826232241
red and blue grow light bulbs

red and blue grow light bulbs Red/Blue Grow Light | 3 Headed Gooseneck Grow Light

Sale price$22.28 Regular price$24.75
Save 10%

Pay in installments of $6.19 with ShopPay, AfterPay and Klarna

Shipping Estimate
USA
  • USA
  • CAN

Ships within 48 hours · Estimated delivery Jul 3 - Jul 8

Promo Codes Available:

For Your Every Summer RSVP, with Code: SUMMER15

Description

red and blue grow light bulbs Red/Blue Grow Light | 3 Headed Gooseneck Grow Lightdescription Our red blue grow light gives your plants the extra light they need to thrive, right where you need it. Whether your space is on the dark side, or the winter months are leaving your plants short on sun, this light helps fill the gap. The light heads are flexible, so you can angle them whichever way your plants are growing. If your plants could do with a little more light, this is an easy place to start. We've put years of work into the

 

 

description

Our red/blue grow light gives your plants the extra light they need to thrive, right where you need it.

Whether your space is on the dark side, or the winter months are leaving your plants short on sun, this light helps fill the gap.

The light heads are flexible, so you can angle them whichever way your plants are growing.

If your plants could do with a little more light, this is an easy place to start.

We've put years of work into the internals, especially the power supply and control box, which is the most common failure point on cheaper grow lights.

We're confident these are some of the most durable lights you can buy, and we back them with a 2 year guarantee. If anything goes wrong in that time, just contact our support and we'll arrange a refund or replacement.

why you will love it

built in timer

The light has a built-in timer, so it runs for 3, 9 or 12 hours and then switches off on its own, or stays on indefinitely if you prefer.

custom light settings

Switch between blue light, red light, or both together, with five brightness levels for each setting.

designed to adapt

A simple clip fixes the light to a table or shelf, and the flexible neck bends to suit any layout, for soil and hydroponic plants alike.

how it works

This indoor unit has a robust metal build and quality Light Emitting Diodes (LEDs) that emit light mainly in the blue and red wavelengths. Both matter for healthy growth: blue light supports chlorophyll production, which drives photosynthesis and healthy leaf and stem growth, while red light encourages germination, root development and bulb formation. The result is an efficient light that gives your plants the wavelengths they use, and little that they don't.

Light output concentrated in the blue (460 to 470nm) and red (620 to 630nm) bands.

specifications

dimensions

Light tube: 27cm
Adjustable neck: 39cm
Power cord: 155cm, with the option to add another 3m using our USB extension cable.

product specifications

three-headed light (BreezyGro)
Input voltage 5V
Rated power 10W
Monthly energy cost* ~ $1.19
Blue light wavelength 460 to 470nm
Red light wavelength 620 to 630nm
Lifetime 50,000 hours (around 5 years of continuous use)

* Assumes 12 hours a day at an average Australian electricity price of 33c/kWh.

included

  • 1 × LED grow light (two-headed and three-headed options available)
  • 1 × wall socket adaptor
  • 1 × user manual
  • integrated controller
  • optional 3m extension cable

Note: the light does not come with plants or a pot.

setup video

setting up your grow light

It arrives fully assembled. Clip it onto a table, shelf or other surface, then arrange the lights over your plants.

positioning your grow light

Keep the light at least 10cm from any leaves so they don't scorch.

  • Set the timer to match your plant and its spot:
    • 12 hours for plants in low-light spaces
    • 9 hours for spaces with indirect natural light
    • 3 hours for plants in bright, naturally lit spots
  • Think about where your plant comes from, too. A low-light houseplant may need very little extra light, while something like basil will want plenty.
  • Start dim and build up to the brighter settings over a few days, so your plants have time to adjust. If leaves start to brown or look scorched, lower the intensity.

faqs

are these lights suitable for soil plants too?

Yes. The light simply gives your plants the wavelengths they need to grow, so it works just as well for hydroponics, aquaponics, or soil-grown gardening.

does the light produce uv light?

The LEDs give off a very small amount of UV light, less than most household bulbs, and nowhere near enough to harm your plants.

how are grow lights different to normal lights?

The short version: grow lights are tuned to emit the wavelengths plants need to grow. For the longer answer, our FAQ article on the difference between normal lights and grow lights is a good place to start.

what's the best way to measure the effectiveness of a grow light?

Grow lights differ from normal household bulbs because they emit the wavelengths plants need, measured on the PAR scale (more detail below). Most household lights, by contrast, are optimised for the visible spectrum. It helps to know the main measurements:

  • Lumens: the brightness of light within the range the human eye can see.
  • Watts: purely a measure of energy consumption.
  • Kelvin: the "temperature" of light, for example bluish or reddish.
  • PAR: photosynthetically active radiation, the wavelengths plants need to grow.
  • PPFD: photosynthetic photon flux density, the intensity of light in the range plants use.

what's the main difference between the full spectrum and purple grow lights?

These lights have a few features worth comparing, so it's a longer answer. Our FAQ article on the difference between our full spectrum and purple LED grow lights covers it in full.

 

Shipping Notes
  • Free Standard Shipping on $100+ Orders to the USA.
  • Except Preorder products are shipped in 48 hours.
  • Delivery to the USA:
  1. Standard Shipping : 3-10 business days
  • If time is of the essence, please consider selecting expedited delivery for faster service.
Exchange/Return Notes
  • We offer a 30-day return/exchange service after receiving.
  • Final sale items are not eligible for returns or exchanges.
  • To process your return/exchange, please contact us at [email protected]
  • Please click here for more details>>> Return & Exchange Policy
SKU: 29826232241

Discover Niche Categories That Outsell red and blue grow light bulbs

Top-Converting Item to Boost Your Average Order

4.4 ★★★★★
Based on 1858 reviews
Sort
Highest Rating
Newest First
Oldest First
Product Reviews
L
Verified Purchase
Lori K
West Palm Beach, US
★★★★★ 5
Easy set up
Model: iPad Pro 12.9 2022/2021/2020/2018
Nice product. I cracked my screen in my iPad and wanted something to keep it from getting worse
WAS THIS REVIEW HELPFUL?YesReportShare
Reviewed in the United States on June 12, 2026
Z
Verified Purchase
Z-06
Louisville, US
★★★★★ 5
4 years on - Still - A very good printer, if you can ignore its demands to update firmware
Style: WF-7840, Set: DUAL TRAY (500 sheets)/FAX/ADF/PRINT/COPY/SCAN
Summary: It is an excellent printer (4.6 out of 5) if you don't mind its constant requirements to update the firmware, which I have not since the day I bought it. I have had this printer for over a year. It has printed close to 5,000 pages of different sizes, papers, colors and document types. As someone said in the other posts (a big thank you), firmware update is only to drive users to get Epson's proprietary ink cartridges. When the printer harasses me to update the firmware, I just keep on ignoring it. Epson does a good job to harass you both on the printer and computer - just ignore it. Pros: 1. Only printer for <$500, which could print Ledger paper (11x17), which was a must for me. This thing prints beautiful and very crisp AutoCAD drawings. The lineweights and scales are phenomenal. 2. Excellent printing quality using stock and generic print cartridges. The printer can be really customized to get the right tones and textures for your print. Works very well with heavy stock papers and photo papers. I am yet to try any stickers, but I do not foresee any issues with it. 3. Good printing speed. It is not blazing like the commercial printers you find in the offices, but it is very fast for what it does. 4. Excellent connectivity. I had no issues with using either Ethernet or wireless. The printer can print on my Windows devices and Mac machine. I do not print from my phone, so cannot comment on that. 5. Heavy duty. The printer has printed approx. 5,000 pages so far without any troubles. I have not seen it overheat nor do any weird activities when it is printing. Indifferent: 1. Scanning. While scanning quality is very good, the direct scan option is cumbersome. You cannot use the scan button on the printer to scan into the computer disk. You have to go to the computer and activate the scan software to perform scanning. This can be an issue, if you have a setup where your office is on one floor and the printer is on another, like I have in my home. Cons: 1. Heavy. This thing is decently heavy and bulky. Don't try to keep on moving it or have it in your mobile office. Also, make sure to have a good sturdy and stable table. The printer twerks, jerks, sashays, parries. 2. Constant harassment to update the firmware. It can sometime be very annoying, but that's a small price to pay, if you get to ignore it. Look at the bigger picture. Price: When I bought it, the price was just below 3 bills, I understand it has gone up by half a bill (however, I am seeing the price going >$400 on some occasions). The new price of 3 and a half is not bad given the shape of the economy and supply chain issues. Also, the OEM cartridges (812) are cheaper at Staples than trying to Subscribe and Save here. Bottom-line: A very good printer, if you ignore and disprove its petulance to update itself. Update 3/23/2023 - I have had it now for over 2 years. The printer continues to print flawlessly and as of now has little under 10,000 pages printed of different sizes and paper weights. It still begs to update its firmware, which I have not done since its purchase. The only wishlist item I have for this printer is if it were to come with the Epson ink-tank. Update 3/28/2024 - Three years into it I have, still not updated it. The printer continues the work. I have now printed about 12,000 pages. In December, after I replaced all my cartridges, it started missing colors' tones, textures, and locations. Did full printer head alignment and cleaning twice (instructions are clear on the printer screen under Settings-> Maintenance menu). Printed test pages, and now it is working flawlessly. Update 3/20/2025 - Marks 4 years of running this printer. Definitely the least amount of pages printed annually - about 1,500. No firmware update performed and it still cries to update. Still running strong on both inks - generic and branded. There is a seller on eBay that offers XL cartridges for the colored ones too. Definitely worth giving a shot. If you are in a market for a prosumer printer consider this one in your list, if you can get it below $300.
WAS THIS REVIEW HELPFUL?YesReportShare
Reviewed in the United States on May 4, 2022
E
Verified Purchase
Ed Bello
Lake Worth, US
★★★★★ 5
Back with Epson after 5 year break of 2 Decades of Epson usage
Style: WF-7840, Set: DUAL TRAY (500 sheets)/FAX/ADF/PRINT/COPY/SCAN
Monster of a printer/scanner/all-in-one. Love it so far. No issues, I just need to get used to all the options. I have it for my home office and business. I veered away from Epson 5 years ago after 2 decades of Epson printers but I am happy I am back with Epson. Jet ink, one needs to print color every one or 2 weeks or the jets may clog on any ink jet printer. I have been there many times..... test print if needed.
WAS THIS REVIEW HELPFUL?YesReportShare
Reviewed in the United States on May 27, 2026
V
Verified Purchase
Vincent J Venero
Grantham, US
★★★★★ 1
EPSON PRINTER WILL NOT PRINT-BEWARE PLEASE READ THIS BEFORE YOU PURCHASE.
Style: WF-7840, Set: DUAL TRAY (500 sheets)/FAX/ADF/PRINT/COPY/SCAN
The first thing I have to comment on is the number of firmware updates Epson insists on sending to their printers. But its not to make the printer operate better, it to keep you from using an after market remanufactured print cartridge. They are absolutely ridiculous to the point of anal trying to stop people from using a remanufactured ink cartridge. They are constantly updating the chips on their ink cartridges so its so, very difficult to use anything but a genuine Epson new print cartridge. Now there was a class action lawsuit against Epson because of this and Epson lost the lawsuit and was ordered by the court to stop making it impossible to use remanufactured (refilled) ink cartridges, but Epson is ignoring the court order. NO OTHER COMPANY REQUIRES YOU USE THEIR INK CARTRIDGES LIKE EPSON. I have always used genuine factory cartridges in ALL MY PRINTERS, the Epson I explain below never had a remanufacture ink cartridge put in it ever. I would never ever recommend a friend or family member to ever purchase an Epson printer. If you print with varied print specifications like paper size or specify a tray to print from YOU DO NOT WANT THIS PRINTER OR ANY EPSON PRINTER. First of all the printer is slow as molasses. It does not print anywhere the speed they claim. The Epson software and print drivers are very badly flawed. I have been trying for a little over a year to figure out the best ways to get a print job done, and not get the warning "your paper does not match your paper tray selection" . Time and time again I have specified 11x17 paper, which is in tray 2, (only fits in tray 2) and I get this darn warning time and time again. "Your paper does not match your paper tray selection". I have gone to the extent of removing paper completely from tray 1 and purposely specify tray 2 to in my printer properties, and I get the darn dialog box warning anyway. I called Epson customer support and it is like talking to a wall every single time I call them. THE CUSTOMER SUPPORT IS USELESS. So I unplug the printer and let it sit for 10 minutes. I then remove all print jobs from the que. With the same exact properties as the previous attempt sometimes it would print. Then, the other issue with this printer, is I continue to get paper feed errors. I remove both trays and I shine a flashlight in the empty tray spaces and there is no paper in either tray space or in the plastic feed guides. I then remove the back cover which totally opens up all the paper paths. Still no jammed paper is found. I meticulously put the back cover on and put the trays back in. Then resend the print command, but still, it gives paper feed error. I take it all apart again, I remove the printer from the stand and move it to the kitchen counter which is much higher which makes it easier to look inside at every nook and cranny. Still no jammed or misfed paper. Put all back together again, do everything exactly like I did it before and sometimes it will print, and sometimes I get a feed error. I have had to take the darn thing apart as many as 3 times to get it to print without a paper jam error. I DO NOTHING DIFFERENT THAN I HAD DONE EVERY TIME, but finally it prints. I called customer support at least 4 times. The response I usually get, “that is impossible you are missing a piece of paper that was jammed. “ This last time I took 14 pictures of all the paper pathways from front and back of the printer. I called and explained what was going on, again, and told them I wanted to send the pictures, but they would not let me. I hung up, I removed the printer from the stand and threw it as far as I could out the back door of the house, which I should have done after the second time occurred on any of the issues. That would have kept me from wasting my time and getting totally used up with their customer support at Epson. But this last time I had a deadline which was dropped on my shoulders by State Farm Homeowners insurance with no prior warning, and I HAD to get a printed copy down to my agent. I ended up driving to Office Depot and printing it there. Now I will say one thing, NO COMPANY HAS A PRICE LIKE EPSON HAS, on a printer like this that will print both 11x17 or as big as 13x19 and 18x22 inch paper. The next best prices is over $2000.00. To add insult to injury, I have the Amazon extended warranty option on everything I buy from Amazon, but Asurion ( that’s who does the Amazon extend warranty) would not cover it because they said it was a factory defect. I have asked for proof and they said they would send me documentation.
WAS THIS REVIEW HELPFUL?YesReportShare
Reviewed in the United States on November 19, 2025
P
Verified Purchase
Patti VanGorden
New York, US
★★★★★ 5
Pleasantly surprised at the size of this machine
Style: WF-7840, Set: DUAL TRAY (500 sheets)/FAX/ADF/PRINT/COPY/SCAN
This is an amazing printer!! I was surprised at how large it is because I assumed it was a smaller sized unit. I guess I didn’t check the dimensions before I bought it. That’s okay, though, I made room for it. Very easy to set up and connect to the internet. Print quality is awesome and the print/copy speed is great! Very happy with my purchase.
WAS THIS REVIEW HELPFUL?YesReportShare
Reviewed in the United States on April 25, 2026

recommand products